Shenzhen Haohua Electronic Co.,Ltd
Professional Pressure, Level, Temperature Transmitter solution provider
Add to Cart
Instruction:
HPT-1 sanitary pressure transmitter uses piezoresistive silicon chip as sensing element, which is made with flush membrane structure. It has clamping type, M21×1.5 thread type, 2"clamp and flange type for options. Current and voltage output signal are optional.
The product have good ability on preventing fouling, crystallization and jamming of thick liquid and widely used on pressure measure in , papermaking, paint, medical pharmacy, food & beverage.etc.
Features:
|
|
|
|
Applications:
|
|
|
|
|
Specifications( Refer to 25℃ )
| Sensor Type | Piezoresistive | Operable Temp.(℃) | -20~85℃ | |
| Wetted parts | 306L Stainless steel | Storage Temp(℃) | -20℃…85℃ | |
| Housing | 304 or 306L Stainless steel | Long term stability(annual) | ±0.25%FS(typical) | |
| Sealing method | Welding | Zero error(%FS) | ±0.5% | |
| Voltage(V) | 12-36V(24V standard) | Full range error(%FS) | ±0.5% | |
| Protection grade | IP65 | Thermal Zero drift(%FS)* | ±2.0% | |
| Thermal Span drift(%FS)* | ±2.0% | |||
| Pressure port | 1)Clamp | Input Voltage / Output | See below code description | |
| 2) Customized | Response | 1KHz | ||
| Accuracy (Combined Non-linearity, Hysteresis and Non-repeatability)%FS | 0.5%(Typical) | Insulation | Min1MΩ @250VDC&25℃ | |
| Shock | 100g,11msec | |||
| Pressure Range) | 0..35Mpa | Noise | < 2m VRMS | |
| Over pressure | 3X Full Range | Pressure reference | Absolute /Vent Gauge/ Seal Gauge | |
| Burst pressure | 4X Full Range or 20kpsi which is less | Weight | 95g Max. | |
| Life | >107 Full Range Pressure | Model | HPT-9 |
| HPT-9 pressure transducer model code | ||||||||
| Model | Description | |||||||
| HPT-9 | Sanitary pressure transmitter | |||||||
| Range/Code | Pressure unit | |||||||
| 0-X P | Pa | |||||||
| 0-X K | Kpa | |||||||
| 0-X B | Bar | |||||||
| 0-X M | Mpa | |||||||
| 0-X S | PSI | |||||||
| 0-X m | Mh2o | |||||||
| Code | Output Signal | |||||||
| E | 4-20mA two wire | |||||||
| F | 1-5V | |||||||
| J | 0-5V | |||||||
| Q | 0-10V | |||||||
| Z | others | |||||||
| Code | Accuracy (%FS) | |||||||
| J1 | 0.1 | |||||||
| J2 | 0.25 | |||||||
| J3 | 0.5 | |||||||
| Code | Pressure port | |||||||
| C1 | Clamp | |||||||
| X | Customized | |||||||
| Code | I/O Outlet | |||||||
| B3 | Direct cable | |||||||
| X | Customized | |||||||
| Code | Pressure reference | |||||||
| G | Vent Gauge | |||||||
| A | Absolute | |||||||
| Example: | ||||||||
| HPT-9 | 10B | E | J2 | C1 | X | G | ||
| HPT-9 | 10Bar | 4-20mA | 0.25% | Clamp | Customized | Gauge | ||
| Model Choose:HPT-9-10B-EJ2C1XG | ||||||||
